2 in 1 Plasma Beauty Machine
2 in 1 Plasma Beauty Machine
Before using the instrument, please read the manual carefully and operate it strictly in accordance with the instructions in the manual.
2 in 1 Plasma Beauty Machine
The 2-in-1 plasma Beauty Machine consists of a flash plasma and an ozone plasma.
Golden handle function one of A flash plasma:facial lifting and firming, removing spots and wrinkles.
White handle function two of an ozone plasma: Anti-inflammatory sterilization, soothing and itching, metabolic pigment, regulating oil secretion • controlling oil and cleaning skin .Seven different probes can be replaced for allergic skin, acne, eczema, dermatitis and other skin.
The ionization of free electrons will change the gas state when the gas material exerts energy.
The energy applied at this time is: heat, AC, DC, RF and other different kinds.
In the case of plasma, DC current is used as energy source.
Rapid healing, lasting effect, no scar and pigmentation - unique technology
· The sequence of spark discharges produced by DC: the heat generated by spark discharges makes the skin hot. Compared with the discharges formed by AC discharges, the mechanism of DC discharges has a great influence on the small parts of the skin and is very valuable. DC discharges do not damage the surrounding tissues.
· Discharge is a conductive connection between the tip of the device and the patient's skin. The distance between the tip and the skin is 4 mm. In the treatment area, air containing free electrons at the discharge point absorbs a large amount of energy, causing air to penetrate, stop acting as an insulator and start guiding current (electric shock). Air ionizes and becomes plasma.
· Through the use of plasma can stimulate cell regeneration, so as to achieve anti-aging, enhancing skin absorption, anti-bacterial skin purification, effective whitening and brightening muscle, improving fine lines, increasing skin elasticity, lifting face contour , removing spots and other effects.
Differences in spark size between direct current (DC) and alternating current (AC) devices
The plasma is heated by DC electric spark, and the spark discharge area is only 0.1mm².
●Lifting and tightening：From 1 to 3.
●Speckle：From 3 to 5. In low-energy operation, it is operated in one to three times. (No more than 2 seconds per stay)
In high-energy operation, it is operated in one to two times. You can see that the epidermis is white.
The repair process can not be delayed many times without operation.
●Winkle ：From 1 to 2, Operating in a small area, when operating, you can see the skin whitening;
It cannot be operated multiple times to delay the repair process.
❶When replacing the probe, it must be suspended before replacing it.
❷Operator, do not touch the metal part of the probe during operation
（No.4 , No.6）
In low-energy operation, it is operated in one to three times. (No more than 2 seconds per stay);
In high-energy operation, it is operated in one to two times.(No more than 2 seconds per stay).Probe No. 4 and Probe No.6（Not touching the skin）：Put the needle tips closer to the speckled skin and see the sparks. Pay attention to the operation only on the surface of the speckle, and remember not to stay for more than 2 seconds.
●Maintenance probe: Clean probe with saline before and after operation.
▲Note that if the area is large and the pigmentation is deep, it is necessary to treat 2 times to 3 times. If the spots are shallow and the area is small, it can be removed once.
▲In the case of deep spots, it is recommended to perform the operation regularly for many times.
▲There will be a burning sensation in the treatment site, so don't worry too much. The affected area should be wiped with repair factor or erythromycin every day to accelerate skin repair. The face is forbidden use water within a week, and the area around the eyes is carefully wiped with a cotton swab dampened to avoid bacterial infection.
▲When the scab is itchy (tender meat growth period), it is forbidden to use hand picking. The scab will fall off naturally in about 7-10 days.（The pigments in the skin will concentrate under the scab, and the pigments in the skin will fade with the scab.）
▲Temporary skin erythema or pigmentation occurred after scab removal in the operation area. Pigmentation gradually subsided after 1 month and returned to normal after 2-3 months. Avoiding strong light within 3 months after operation is the key to prevent pigmentation.
▲The recovery period is 1-2 months. Do not eat ginger (the skin is not so flat after recovery).Beef (there will be a touch of red), soy sauce (there will be a touch of black) .during the recovery period, avoid drinking, eating spicy food, avoiding photosensitive foods (such as celery, leeks, parsley, etc.).
▲Sauna or vigorous exercise should be avoided in order to avoid infection and delay the repair process.
What is ozone?
A high frequency voltage is generated, and oxygen in the air is electrolyzed to generate ozone.
The function of ozone
Ozone acts on the cell membrane of bacteria, causing damage to the membrane components, destroying lipoproteins and lipopolysaccharides in the membrane, changing cell lysis and death, thereby killing bacterial fungi and aphids in a very short period of time, and inhibiting inflammation, and the effect of acne is obvious. , ozone is reduced to oxygen after sterilization.There is no residue or secondary pollution, which is unachievable by any chemical system.
The future and benefits of Ozone plasma
« It can be used in all parts.
« There was no wound on the epidermis after the operation of it.
« Skin regeneration after operation of it.
« New collagen was produced on the dermis after the operation of it.
« Skin elasticity improves with the production of new collagen after the operation of it.
« No pain, no scarring, no bleeding, no wounds, non-invasive operation, more convenient operation, safer and more effective.
Main efficacy of ozone plasma
●Improve the absorption rate of effective ingredients in skin care products, improve the effect of functional cosmetics.
●Sterilization and anti-inflammation, effective removal of deep skin acne bacteria, acne marks, acne and other with obvious effects, and prevent recurrence.
●Accelerate skin metabolism, promote collagen regeneration, and alleviate skin aging.
●Alleviate skin itching caused by allergy and dryness.
●Inhibits melanin, brightens skin tone, refines skin texture and shrinks pore.
Effects of the ozone plasma
1. Ozone plasma -efficient penetration
Ultra-micro plasma can activate skin epidermal cells instantaneously, increase the hydrophilicity of skin to help other molecules to bind and help the effective ingredients of nutrient solution to be fully absorbed to improve the skin and make the skin more lustrous.
2. Improving skin elasticity and anti-aging
The cells have a membrane potential, the inner membrane is negatively charged, and the outer membrane is positively charged. As the skin ages, the distribution of charge along the film is not uniform, thereby changing the voltage of the film.
The membrane potential is affected by potassium ions and sodium ions. Potassium ions easily pass through, and it is difficult for sodium ions to change the membrane potential through the ozone plasma, so that all types of ions easily pass through the membrane and balance the potential, thereby tightening the membrane.
3.Removing Acne and Hemorrhoids
Skin exfoliation produced by ozone plasma has obvious effect on dead glial cells, killing 75% of acne-inducing bacteria and acne vulgaris, especially for inflammatory acne. It has the effect of inhibiting sebum secretion and preventing acne recurrence.
4.Antibacterial and anti-inflammatory
Ozone plasma contains reactive oxygen atoms, oxygen molecules and plasma produced by the radiation will destroy the bacterial cell membrane, DNA and protein, thus playing a bactericidal effect.
Steps for usage
❶Please take off all metal accessories before nursing.
❷When the probe is discharged, the face should be wiped with alcohol cotton first, and the probe should be kept dry after disinfection treatment. (Do a good job of detoxification to prevent cross-infection)
❸Before nursing, clean the skin deeply and keep the skin fresh and dry after cleaning.
❹Energy from 1 to 5, operation is recommended to use energy from 2 to 4.
(Adjusting energy according to personal feeling when using, and adjusting energy when there is no feeling）.
❺Press the start button in operation,→Put the treatment head close to the skin, operating from bottom to top, staying 2-3 seconds, and operate one part 2-3 times.
❻After the operation, the essence can be introduced, massage to promote absorption, can also apply mask.
❼After using the instrument, the treatment head can take out the waste from deep skin pores, and wipe the treatment head with alcohol cotton to disinfect it.
★In order to ensure ozone production and efficiency, it is necessary to clean the probe (the discharge surface of ozone sheet) with alcohol or hydrogen peroxide after each operation, and clean the surface adsorbate in time, which can prolong the service life and slow down the attenuation of ozone production.
The following people are prohibited to use:
▲Those place the artificial heart pacemaker,or suffer from arrhythmia or any other serious heart disease.
▲Those quipped with any implantable metal device
▲Beauty apparatus is not recommended for pregnant women or breast-feeding women.
Start-up: Check whether the instrument connection is normal, the instrument is connected to the power supply, press the main engine power switch, the machine will start immediately, the boot-up interface appears (as shown below).
A: Automatic mode (The pause of the handle and the operation interface is synchronized with the start key, either by pressing the display screen or by pressing the handle.)
M: Manual mode (With pedal operation, the Pause（or the start key） key of the handle or display screen can not press, which is normal.)
Clinical cases of ozone plasma
Effectiveness Contrast Chart of A flash Plasma
Instrument technical parameters / package size：
Product name：2 in 1 plasma Input voltage：110-220V
Output frequency：15Hz-150Hz Output power：10-60W
Package size：41X38X51 CM Total weight：11KG